Published 2000-Present (38)

Published 1990-1999 (46)

Published 1980-1989 (22)

---

Wasiluk, B., Petti, J. and Dodds, R. "Temperature Dependence of Weibull Stress Parameters: Studies Using the Euro-material," Engineering Fracture Mechanics, Vol. 73, pp. 1046-1069, 2006.

Shim, D., Paulino, G. and Dodds, R. "Boundary Layer Framework Considering Material Gradation Effects, Engineering Fracture Mechanics, Vol. 73, pp. 593-615, 2006.

Shim, D., Paulino, G. and Dodds, R. "Effect of Material Gradation on K-Dominance of Fracture Specimens," Engineering Fracture Mechanics, Vol. 73, pp. 643-648, 2006.

Shim, D., Paulino, G. and Dodds, R. "J Resistance Behavior in Functionally Graded Materials Using Cohesive Zone and Modified Boundary Layer Models," accepted for publication in International Journal of Fracture, January 2006.

Walters, M., Paulino, G. and Dodds, R. "Computation of Mixed-Mode Stress Intensity Factors for Cracks in Three-Dimensional Functionally Graded Solids," ASCE Journal of Engineering Mechanics, Vol. 132, No. 1, pp. 1-15, 2006.

Petti, J. and Dodds, R. "Effects of Ductile Void Growth on Cleavage Fracture in Ferritic Steels," International Journal of Solids & Structures, Vol. 42, No. 13, pp. 3655-3676, 2005.

Walters, M., Paulino, G. and Dodds, R. "Interaction-Integral Procedures for 3-D Curved Cracks Including Surface Tractions," Engineering Fracture Mechanics, Vol. 72, pp. 1635-1663, 2005.

Gao, X. and Dodds, R. "Loading Rate Effects on Parameters of the Weibull Stress Model for Ferritic Steels," Engineering Fracture Mechanics, Vol. 72, pp. 2416-2425, 2005.

Qian, X., Dodds, R. and Choo, Y.S. "Mode Mixity for Circular Hollow Section X-Joints with Weld Toe Cracks, ASME Journal of Offshore Technology & Artic Engineering, Vol. 127, pp. 269-279, 2005.

RoyChowdhury, S. and Dodds, R. "Three Dimensional Model for Overload Effects on Fatigue Crack Closure in the Small-Scale Yielding Regime," Fatigue & Fracture of Engineering Materials and Structures, Vol. 28, pp. 891-907, 2005.

Qian, X., Dodds, R. and Choo, Y.S. "Effects of Weld-Strength Mismatch on Elastic-Plastic Fracture in Circular Hollow Section X-Joints, Engineering Structures, Vol. 27, pp. 1419-1434, 2005.

Qian, X., Dodds, R. and Choo, Y.S. "Mode-Mixity for Tubular K-Joints with Weld Toe Cracks Under Different Boundary Conditions," accepted for publication in Engineering Fracture Mechanics, November 2005.

Dodds, R. and Roychowdhury, S. "Modeling of Three-Dimensional Effects on Fatigue Crack Closure Processes," Journal of ASTM International, Vol. 2, No. 5, pp. 2-19, 2005 (2003 Jerry L. Swedlow Lecture).

Petti, J. and Dodds, R. "Calibration of the Weibull Stress Scale Parameter σ_u, Using the Master Curve," Engineering Fracture Mechanics, Vol. 72, pp. 91-120, 2005.

Petti, J. and Dodds, R. "Constraint Comparisons for Common Fracture Specimens: C(T)s and SE(B)s," Engineering Fracture Mechanics, Vol. 71, pp. 2677-2683, 2004.

Petti, J. and Dodds, R. "Coupling of Micro and Macro-Scale Models to Predict Cleavage Fracture," Engineering Fracture Mechanics, Vol. 71, pp. 1079-2103, 2004.

Jin, Z.H. and Dodds, R. "Crack Growth Resistance Behavior of a Functionally Graded Material: Computational Studies," Engineering Fracture Mechanics, Vol. 71, pp. 1651-1672, 2004.

RoyChowdhury, S. and Dodds, R. "Effect of T-Stress on Fatigue Crack Closure in 3-D Small-Scale Yielding," International Journal for Solids and Structures, Vol. 41, pp. 2581-2606, 2004

Walters, M., Paulino, G. and Dodds, R. "Stress Intensity Factors for Surface Cracks in Functionally Graded Materials Under Mode I Thermo-Mechanical Loading," International Journal for Solids and Structures, Vol. 41, pp. 1081-1118, 2004.

Liang, Y., Sofronis, P. and Dodds, R., "Interaction of Hydrogen with Crack-tip Plasticity in the Presence of a T-Stress: Effects on Void Growth," Materials Science and Engineering A, Vol. 366, pp. 397-411, 2003.

Jin, J., Paulino, G., and Dodds, R., "Cohesive Fracture Modeling of Elastoplastic Crack Growth in Functionally Graded Materials" Engineering Fracture Mechanics, Vol. 70. pp. 1885-1912, 2003.

RoyChowdhury, S. and Dodds, R. "Three Dimensional Effects on Fatigue Crack Closure in the Small-Scale Yielding Regime," Fatigue & Fracture of Engineering Materials and Structures, Vol. 26, pp. 663-673, 2003.

RoyChowdhury, S. and Dodds, R. "A Numerical Investigation of 3-D Small-Scale Yielding Fatigue Crack Growth," Engineering Fracture Mechanics, Vol. 70, pp. 2363-2383, 2003.

RoyChowdhury, S., Roy, A. and Dodds, R. "Ductile Tearing in Thin Aluminum Panels: Experiments and Analyses Using 3-D Large Displacement Surface Cohesive Elements," Engineering Fracture Mechanics, Vol. 69, pp. 983-1002, 2002.

Jin, J., Paulino, G., and Dodds, R. "A Phenomenological Cohesive Zone Model for Fracture Simulation in Functionally Graded Materials," Journal of Applied Mechanics, Vol. 69, pp. 370-379, 2002.

Matos, C. and Dodds, R. "Probabilistic Modeling of Weld Fracture in Steel Frame Connections Part II: Seismic Loading," Engineering Structures, Vol. 24, pp. 687-705, 2002.

Matos, C. and Dodds, R. "Modeling of Cleavage Fracture in Connections of Welded Steel Moment Resistant Frames," Fatigue and Fracture Mechanics: 33rd Volume, ASTM STP 1417, W. G. Reuter and R. S. Piascik, Eds., American Society for Testing and Materials, West Conshohocken, PA, 2002.

Gao, X., and Dodds, R. "Weibull Stress Model for Cleavage Fracture Under High-Rate Loading," Fatigue & Fracture of Engineering Materials & Structures, Vol. 24, pp. 551-564, 2001.

Roy, A. and Dodds, R. "Simulation of Ductile Crack Growth In Thin Aluminum Panels Using 3-D Surface Cohesive Elements," International Journal of Fracture, Vol. 110, pp.21-45, 2001.

Matos, C. and Dodds, R. "Probabilistic Modeling of Weld Fracture in Steel Frame Connections Part I: Quasi-Static Loading," Engineering Structures, Vol. 23, pp. 1011-1030, 2001.

Gao, X., and Dodds, R. "A Simplified Approach to Predict Constraint Effects of the Reference Temperature T_o," Engineering Fracture Mechanics, Vol. 68, pp. 263-283, 2001.

Gullerud, A., and Dodds, R., "MPI-Based Implementation of a PCG Solver Using an EBE Architecture and Preconditioner for Implicit, 3-D Finite Element Analysis," Computers & Structures, Vol. 79, No. 5, pp. 553-575, 2001.

Gao, X., and Dodds, R. "Effects of Loading Rate on the Weibull Stress Model for Simulation of Cleavage Fracture in Ferritic Steels," Fracture, Fatigue and Weld Residual Stress, ASME, PVP, 2000.

Gao, X., and Dodds, R. "Predication of the T_o Shift Between Specimens of Different Constraints Using the T-stress Based t-functions," International Journal of Fracture, Vol. 104, pp. L3-L8, 2000.

Gao, X., and Dodds, R. "Constraint Effects on the Ductile-to-Brittle Transistion Temperature of Ferritic Steels: A Weibull Stress Model," International Journal of Fracture, Vol 102, No.1, pp. 42-69, 2000.

Gullerud, A., Dodds, R. "Simulation of Ductile Crack Growth Using Computational Cells: Numerical Aspects," Engineering Fracture Mechanics, Vol. 66, No. 1, pp 65-92, 2000.

Matos, C. and Dodds, R. "Modeling the Effects of Residual Stresses on Defects in Welds of Steel Frame Connections," Engineering Structures, Vol. 22, No. 9, pp. 1103-1120, 2000.

Ruggieri, C., Gao, X., and Dodds, R. "Transferability of Elastic-Plastic Fracture Toughness Using the Weibull Stress Approach: Significance of Parameter Calibration," Engineering Fracture Mechanics, Vol. 67, pp. 101-117, 2000.

:: return to top ::

---

Gullerud, A. and Dodds, R. "3-D Modeling of Tearing in Thin Aluminum Sheets," Fatigue and Fracture Mechanics: 30th Volume, ASTM STP , P. Paris and K. Jerina, (Eds.) American Society for Testing and Materials, Philadelphia, pp.85-101, 1999.

Gullerud, A. and Dodds, R. "3-D Modelig of Ductile Crack Growth in Thin Sheet Metals: Computational Aspects and Validation," Engineering Fracture Mechanics, Vol. 63, pp. 347-374, 1999.

Gao, X., and Dodds, R. "A Weibull Stress Model to Predict Cleavage Fracture in Plates Containing Surface Cracks," Fatigue & Fracture of Engineering Materials and Structures, Vol. 22, pp. 481-493, 1999.

Gao, X., and Dodds, R. "Cleavage Fracture in Surface Cracked Plates: Experiments and Numerical Prediction," Fracture, Fatigue and Weld Residual Stress, ASME, PVP-Vol. 393, J. Pan (Ed.), pp. 11-16, 1999.

Gao, X., Ruggieri, C. and Dodds, R. "Calibration of Weibull Stress Models Using Fracture Toughness Data," International Journal of Fracture, Vol. 92, pp. 175-200, 1998.

Koppenhoefer, K. and Dodds, R.H., "Constraint and Ductile Tearing Effects on on Fracture Toughness of Impact Loaded, Pre-Cracked CVN Specimens," Fatigue and Fracture Mechanics: 29th Volume, ASTM STP 1321, T. Panontin and S. Shepard, Eds., American Society for Testing and Materials, Philadelphia, pp. 1998.

Ruggieri, C., Dodds, R. and Wallin, K., "Constraint Effects on Reference Temperature, T_o, for Ferritic Steels in the Transition Region," Engineering Fracture Mechanics, Vol. 60, pp. 19-37, 1998.

Gao. X., Faleskog, J. Dodds, R.H. Jr., and Shih, C.F. "Ductile Tearing in Part-Through Cracks: Experiments and Cell-Model Predictions," Engineering Fracture Mechanics, Vol. 59, pp. 761-777, 1998.

Koppenhoefer, K., Dodds, R.H. "Impact Loading Effects on Ductile Crack Growth in Pre-Cracked CVN Specimens: Numerical Studies," Nuclear Engineering and Design, Vol. 180, pp. 221-241, 1998.

Ruggieri, C., and Dodds, R.H. "Numerical Evaluation of Probabilistic Fracture Parameters with WSTRESS," Engineering Computations, Vol. 15, pp. 49-73, 1998.

Dodds, R.H. Jr, Ruggieri, C., and Koppenhoefer, K.C. "3-D Constraint Effects on Models for Transferability of Cleavage Fracture Toughness," Fatigue and Fracture Mechanics: 28th Volume, ASTM STP 1321, J. H. Underwood and B. D. MacDonald, M. R. Mitchell, Eds., American Society for Testing and Materials, Philadelphia, pp. 179-197, 1997.

Koppenhoefer, K. and Dodds, R.H. "A 3-D Numerical Investigation of Loading Rate Effects on Cleavage Fracture of Pre-Cracked CVN Specimens," Engineering Fracture Mechanics, Vol. 58, pp. 249-270, 1997.

Newman, J.C. and Dodds, R.H. "From Brittle to Elasti-Plastic Fracture Mechanics," Proceedings, 9th International Conference on Fracture (ICF9), George R. Irwin Honorary Session, Sydney, Australia, April 1997.

Ruggieri, C. and Dodds, R.H. "Probabilistic Modeling of Brittle Fracture Including 3-D Effects on Constraint Loss and Ductile Tearing, Journal de Physique IV, Vol. 6, pp. 353-362, 1996.

Ruggieri, C., Panontin, T.L. and Dodds, R.H. "Numerical Modeling of Ductile Crack Growth in 3-D Using Computational Cell Elements," International Journal of Fracture, Vol. 82, pp. 67-95, 1996.

Ruggieri, C., and Dodds, R.H. "A Transferability Model for Brittle Fracture Including Constrant and Ductile Tearing Effects: A Probabilistic Approach," International Journal of Fracture, Vol. 79, pp. 309-340, 1996.

Shen, Q., Dodds, R.H. Jr., Boothman, D. and Luxmoore, A.R. "J Estimation for Shallow Notch SE(B) Specimens: 3 and 4 Point Bending vs. 'Pure' Bending," International Journal of Fracture, Vol. 772, pp. R11-R17, 1996.

Koppenhoefer, K. and Dodds, R.H. "Constraint Effects on Fracture Toughness of Impact Loaded, Pre-Cracked Charpy Specimens," Nuclear Engineering and Design, Vol. 162, pp. 145-158, 1996.

Gullerud, A. and Dodds, R.H. "J-Q and TSM Solutions for Common Fracture Specimens," International Journal of Fracture, Vol. 72, pp. R11-R21, 1995.

Nevalnien, M., and Dodds, R.H. "Numerical Investigation of 3-D Constraint Effects on Brittle Fracture in SE(B) and C(T) Specimens," International Journal of Fracture, Vol 74, pp. 131-161, 1995.

Vargas, P.M. and Dodds, R.H. "Inelastic Response of a Deep Crack Single-Edge Notch Specimen Under Impact Loading," Journal of Offshore Mechanics and Artic Engineering, ASME, Vol. 117, pp. 205-211, 1995.

Vargas, P.M. and Dodds, R.H. "Strain Rate and Inertial Effects on Impact Loaded Single Edge Notched Bend Specimens," ASTM STP 1256, W. Reuter, H. Underwood and J. Newman (Eds.) American Society for Testing and Materials, Philadelphia, pp. 715-731, 1995.

Porr, W.C., Link, R.E., Waskey, J.P. and Dodds, R.H. "Experimental Application of Methodologies to Quantify the Effect of Constraint on J_c for a 3-D Flaw Geometry," ASTM STP 1256, W. Reuter, H. Underwood and J. Newman (Eds.) American Society for Testing and Materials, Philadelphia, pp. 107-125, 1995.

Dodds, R.H., Tang, M., and Anderson, T.L. "Effects of Prior Ductile Tearing on Cleavage Fracture Toughness in the Transition Region," Constraint Effects in Fracture Theory and Applications: Second Volume, ASTM STP 1244, M. Kirk and A. Bakker (Eds.) American Society for Testing and Materials, Philadelphia, pp. 100-133, 1995.

Koppenhoeffer, K., Dodds, R.H., and Kirk, M.T. "Specimen Size Requirements for Fracture Testing in the Ductile-to-Brittle Transition Region - A Rational Methodology," Constraint Effects in Fracture Theory and Applications: Second Volume, ASTM STP 1244, M. Kirk and A. Bakker (Eds.) American Society for Testing and Materials, Philadelphia, pp. 445-460, 1995.

O'Dowd, N., Shih, C.F., and Dodds, R.H. "The Role of Geometry and Crack Growth on Constraint and the Implications for Ductile/Brittle Fracture," Constraint Effects in Fracture Theory and Applications: Second Volume, ASTM STP 1244, M. Kirk and A. Bakker (Eds.) American Society for Testing and Materials, Philadelphia, pp. 134-158, 1995.

Anderson, T.L., Stienstra, D. and Dodds, R.H. "A Theoretical Framework for Addressing Fracture in the Ductile-Brittle Transition Region," Fracture Mechanics: Twenty-Fourth Volume, ASTM STP 1207, J. D. Landes, D. E.McCabe and J. A. Boulet, Eds., American Society for Testing and Materials, Philadelphia, pp. 186-214, 1994.

Kirk, M.T., Dodds, R.H., and Anderson, T.L. "Approximate Techniques for Prediction of Size Effects on Cleavage Fracture Toughness (JC)," Fracture Mechanics: Twenty-Fourth Volume, ASTM STP 1207, J. D. Landes, D. E.McCabe and J. A. Boulet, Eds., American Society for Testing and Materials, Philadelphia, pp. 62-86, 1994.

Dodds, R.H., Shih, C.F., and Anderson, T.L. "Continuum and Micro-Mechanics Treatment of Constraint in Fracture," International Journal of Fracture, Vol. 64, pp. 101-133, 1993.

Kirk, M.T. and Dodds, R.H. "The Influence of Weld Metal Strength Mismatch on Crack-Tip Constraint in SE(B) Specimens," International Journal of Fracture, Vol. 63, pp. 297-316, 1993.

Dodds, R.H. and Tang, M. "Numerical Techniques to Model Ductile Crack Growth in Fracture Test Specimens," Engineering Fracture Mechanics, Vol. 46, No. 2, pp. 253-264, 1993.

Anderson, T.L. and Dodds, R.H. "Simple Constraint Corrections for Subsize Fracture Toughness Specimens," Small Specimen Test Techniques Applied to Nuclear Reactor Vessel Thermal Annealing and Plant Life Extension, ASTM STP 1204, W.R. Corwin, F. H. Haggag, W.L. Server, Eds., American Society for Testing and Materials, Philadelphia, pp. 93-105, 1993.

Kirk, M.T. and Dodds, R.H. "J and CTOD Estimation Equations for Shallow Cracks in Single Edge Notch Bend Specimens," Journal of Testing and Evaluation, Vol. 24, No. 4, pp. 228-238, 1993.

Anderson, T.L., Vanaparthy, N.M.R., and Dodds, R.H. "Predictions of Specimen Size Dependence on Fracture Toughness for Cleavage and Ductile Tearing," Constraint Effects in Fracture, ASTM STP 1171, E.M. Hackett, K.H. Schwalbe, and R.H. Dodds, Eds., American Society for Testing and Materials, Philadelphia, pp. 473-491, 1993.

Swellam, M.H., Ahmad, M.F., Dodds, R.H. and Lawrence, F.V. "The Stress Intensity Factors of Tensile-Shear Spot Welds," Computing Systems in Engineering, Vol. 3, Nos. 1-4, pp. 487-500, 1992.

Kirk, M.T. and Dodds, R.H. "Experimental J and CTOD Estimation Formulas for Single Edge Notch Bend Specimens Containing Mismatched Welds," International Offshore Mechanics and Artic Engineering Symposium, ASME, Vol. 3, Part B, pp. 439-448, 1992.

Kirk, M.T., and Dodds, R.H. "Approximate Techniques of J Estimation Applicable to Part-Through Surface Cracks," Engineering Fracture Mechanics, Vol. 43, No. 1, pp. 123-134, 1992.

Healy, B.E. and Dodds, R.H. "A Large Strain Plasticity Model for Implicit Finite Element Analyses," Computational Mechanics, Vol. 9, No. 2, pp. 95-112, 1992.

Kirk, M.T., and Dodds, R.H. "Experimental and Numerical Correlation of Ji Values for Surface Flaw Geometries," Engineering Fracture Mechanics, Vol. 39, No. 3, 1991, pp. 535-551.

Dodds, R.H., Anderson, T.L., and Kirk, M.T. "A Framework to Assess a/W Ratio Effects on Elastic-Plastic Fracture Toughness (J_c) in SENB Specimens," International Journal for Fracture, Vol. 48, 1991, pp. 1-22

Anderson, T.L. and Dodds R.H. "Specimen Size Requirements for Fracture Toughness Testing in the Transition Region," Journal of Testing and Evaluation, March 1991, pp. 123-134.

Sorem, W., Dodds, R.H., and Rolfe, S.T. "Comparsion of CTOD and J-Integral Parameters for Evaluation of Shallow Flaws," ASTM STP 1114-Vol. 2 for the National Symposium on Elastic-Plastic Fracture Mechanics, J. A. Joyce (Ed). American Society for Testing and Materials, Philadelphia, 1991, pp. 19-41

Sorem, W., Dodds, R.H., and Rolfe, S.T. "Effects of Crack Depth on Elastic-Plastic Fracture Toughness," International Journal for Fracture, Vol. 47, 1991, pp. 105-126.

Keppel, M. and Dodds, R.H. "Improved Numerical Techniques for Plasticity Computations in Finite-Element Analysis" Computers and Structures, Vol. 36, No. 1, 1990, pp. 183-185.

Sorem, W., Dodds, R.H., and Rolfe, S. "An Analytical Comparison of Short Crack and Deep Crack CTOD Fracture Specimens of an A36 Steel," ASTM STP 1074, J. P. Gudas, et al. (Eds). American Society for Testing and Materials, Philadelphia, 1990, pp. 3-23.

Dodds, R.H., and Read, D.T. "Experimental and Numerical Studies of the J-integral for a Surface Flaw," International Journal for Fracture, Vol. 43, 1990, pp. 47-67.

:: return to top ::

---

Sorem, W., Dodds, R.H., and Rolfe, S. "An Analytical and Experimental Comparison of Rectangular and Square CTOD Fracture Specimens of A36 Steel," Nonlinear Fracture Mechanics: Volume II - Elastic Plastic Fracture, (J.D. Landes, A. Saxena, and J. G. Merkle, Eds., ASTM STP 995, 1989, pp. 470-494.

Dodds, R.H. and Read, D.T. "Experimental and Numerical Studies of the J-integral for a Surface Flaw," Proceedings, Analytical, Numerical, and Experimental Aspects of Three Dimensional Fracture Processes, ASME-AMD Vol. 91, 1988, pp. 1-17.

Dodds, R.H., Carpenter, W.C., and Sorem, W.B. "Numerical Evaluation of a 3-D J-Integral and Comparison with Experimental Results for a 3-Point Bend Specimen," Engineering Fracture Mechanics, Vol. 29, No.32, 1988, pp. 275-285.

Wellman, G., Sorem, W., Dodds, R.H., Rolfe, S. T. "Specimen Thickness Effects for Elastic-Plastic CTOD Toughness of A36 Steel," Fracture Mechanics: 18th Symposium, ASTM STP 945, D.T. read and R.P. Reed, Eds., American Society for Testing and Materials, Philadelphia, 1988, pp. 535-554.

Schmidt, R. and Dodds, R.H. "Hypermatrix Implementation of Subspace Iteration," International Journal for Engineering Computations, Vol. 4, 1987, pp.190-198.

Dodds, R. "Finite Element Evaluation of J parameters in 3-D," International Journal for Fracture, Vol. 33, 1987, pp. R7-R15.

Dodds, R. "Numerical Techniques for Plasticity Computations in Finite Element Analysis," Computers and Structures, Vol. 26, No. 5, 1987, pp. 767-779.

Dodds, R., and Read, D. "Stress Intensity Factors for Cracks in Panels with Uniformly Spaced Holes," Engineering Fracture Mechanics, Vol. 26, No. 2, 1987, pp. 267-277.

Leibengood, L., Darwin, D., and Dodds, R. "Parameters Affecting FE Analysis of Concrete Structures," Journal of Structural Engineering, ASCE. Vol. 112, No.2, February, 1986, pp.326-341.

Carpenter, W., Read, D., and Dodds, R. "A Comparison of Several Three Dimensional Path Independent Integrals," International Journal for Fracture, Vol. 31, 1986, pp. 303-323.

Dodds, R., and Lopez, L. "Software Virtual Machines for Development of Finite Element Systems," International Journal for Engineering Computations, Vol. 3, 1986, pp. 18-26.

Wellman, G., Rolfe, S., and Dodds, R. "Three-Dimensional Elastic-Plastic Finite Element Analysis of Three-Point Bend Specimen," ASTM STP 868, American Society for Testing and Materials, Philadelphia, 1985, pp. 214-237.

Dodds, R.H. and Read, D.T. "Experimental and Analytical Estimates of the J-Integral for Tensile Panels Containing Short Center Cracks," International Journal for Fracture, Vol. 28, 1985, pp. 39-54.

Dodds, R.H., and Read, D.T. "Elastic-Plastic Response of Highly Deformed Tensile Panels Containing Short Cracks," ASME Special Publication On Computational Fracture Mechanics - Nonlinear and 3-D Problems, Vol. 85, Pressure Vessel and Piping Division, June 1984, pp. 25-34.

Dodds, R.H., Darwin, D., and Leibengood, L. "Structures," Journal of Structural Engineering, ASCE, Vol. 110, No. 9, Sep. 1984, pp. 1959-1976.

Wellman, J., Rolfe, S. and Dodds, R.H. "Failure Prediction of Notched Pressure Vessels Using the CTOD Approach," Welding Research Council Bulletin 299, November 1984, pp. 26-35.

Dodds, R.H., Read, D.T., and Wellman, G.W. "Finite Element and Experimental Evaluation of the J-Integral for Short Cracks," ASTM-Special Technical Publication, 791, 1983, pp. 1-520: 1-542.

Easley, J.T., Foomani, M., and Dodds, R.H. "Formulas for Wood Shear Walls," Journal of the Structural Division, ASCE Vol. 108, No. ST11, 1982, pp.2460-2477.

Dodds, R.H., Rehak, D.R., and Lopez, L.A. "Developement Methodologies for Scientific Software," International Journal on Software Practice and Experience, Vol. 12, 1982, pp. 1085-1100.

Dodds, R.H. "Effects of Reduced Integration on the 2-D Quadratic Isoparametric Element in Plane Strain Plasticity," International Journal of Fracture Mechanics, Vol. 19, 1982, pp. R75-R82.

Dodds, R.H. and Lopez, L.A. "A Generalized Software System for Nonlinear Analysis," International Journal for Advances in Engineering Software, Vol. 2, No. 4, 1980, pp.161-168.

Dodds, R.H. and Lopez, L.A. "Substructuring in Linear and Nonlinear Analysis," International Journal for Numerical Methods in Engineering, Vol. 15, 1980, pp.583-597.

:: return to top ::